Are you wanting to give your Jeep a new look? Have you been enticed by the pictures of perfectly installed jeep dash kits?
Maybe you’re unsure of your ability to install them as you are not used
to carrying out your own custom work? Don't worry, you can have faith
in yourself and be confident as installing a dash kit isn't rocket
science! It is a simple task if you observe a couple of key points
carefully and follow them exactly. Let us take a look at those key
points below:
Thorough Cleaning is the Key:
Cleaning
the interior surfaces of your Jeep destined for beautification
thoroughly, is the first step. You need to do it thoroughly or else the
Jeep dash kit panels may start to detach at some point in the future.
Isopropyl Rubbing Alcohol is best for cleaning interior surfaces. Use
plenty of it as it will not harm the dashboard in any way. Make sure
that the base surface is free from dirt, grease and fingerprints. This
is especially important if your Jeep has had Armor-All or any other
interior surface dressing applied. Any trace of this MUST be removed
thoroughly.
Plan and Practice Well Before Actual Installation:
Before installing your Jeep dash kit,
make sure the surface is completely and properly cleaned. Before
beginning to peel off the protective liner from the adhesive, you should
dry fit all the pieces first. Hold the pieces in place to ensure that
they fit well and all the buttons can move freely. Dry fitting process
helps you in figuring out the points that you should use as reference
points when carrying out the actual installation. Practice-fitting is
the best way to know exactly how to apply the pieces and to get them in
the right place on the first attempt. Planning and practicing dry
fitting makes the work flow smooth and precise. Some of the critical
areas that you need to pay special attention to include the corners,
narrow strips of trim, around air vents, around the edges of areas where
flexing of the dash kit component is required to make it fit perfectly.
Use the included adhesive promoter on areas that require flexing and
bending of the pieces.
Begin with Easy Fittings Pieces First:
Begin
with small and flat pieces that are easy to fit and do not require
promoter to stay in place. It will help to get the right feel for the
material and help you fit the components with required precision in the
easiest way possible. You may initially find applying promoter as a
difficult task but it is actually an easy process if you have made a
proper plan and protected the surrounding areas carefully and
thoroughly. After a few minutes of applying the promoter, it is time
for you to put the components of the Jeep dash kit in place. Peel the
backing off and apply each piece to its place exactly where you
practiced the dry fitting.
Once
the installation is done, wipe everything down using a soft cloth. And
it is done! Just lean back, enjoy and take pride in your newly installed
Jeep dash kit! You have just transformed your Jeep into something even
more exciting and appealing than ever before! Just remember one thing -
Never rush to install the dash kit! Take your time and get it done
right!
Conclusion:
Checkout our wide collection of Jeep dash kits at https://www.dashkitspecialties.com/dash-kits-jeep.html
that include real wood grain, synthetic wood grain, fun colors, bright
chrome, brushed aluminum and carbon fiber dash kits for many Jeep models
including Wrangler, Cherokee, Commander, Compass, Patriot and Liberty.
No comments:
Post a Comment