Installing a Dash Kit Properly - Instructions to Follow

Usually you will find that all the dash kits today come with a detailed DIY installation guide. Following is the guide that will help you install our dash kits be it a flat (2D) or molded (3D) dash kit element.

How to prepare for installing a dash kit?

• First of all make sure that the interior temperature of your vehicle is at least 72°F.
• Next, read the instructions thoroughly that come with the specific dash kit in order to determine any sort of special instructions for your dash kit components.
• Begin with installing smaller pieces first to get familiar with the installation process.
  

What are the steps to install dash kits?

Step #1: Dash Kit Test Fitting

Test fitting the dash kit without removing the backing and exposing the adhesive is a must. Place each piece of the dash kit over the area where it needs to be applied to ensure that each piece fits correctly in its place. In case you find any piece does not match or appears to be damaged then get in touch with us and we can assist you. For 2D flat dash kits installation test fitting helps you in locating the areas that will be covered with adhesives afterwards. During test fitting you need to ensure that all buttons and vents move and work freely without touching the dash kits elements.

Step #2: Preparation and Surface Cleaning

Now once you are done with the test fitting process, clean the dash areas thoroughly where the dash kit pieces will be applied. This step helps in ensuring that the surface area is free of any dirt or lint. For cleaning the dash areas you should use Is propyl Alcohol. Usually the silicone based vinyl treatment products such as Armor all leave a silicone residue that reduces the kit adhesion to a great extent. This MUST be cleaned off completely. You need to note that if your vehicle has gone through vinyl treatments then it needs to be cleaned thoroughly.

Step #3: Dash Kit Installation

Using the Adhesion Promoter pen that was included with your kit, run a bead of promoter on the dash surface under where the edges of each piece will set down. Let dry for about 2 minutes. Peel off the corner of the Red Liner on the adhesive and remove. Once you completely remove the red backing, make sure to lightly press each piece into place. Don’t worry if you make a mistake and the piece is not positioned correctly. You can remove it and try again. Once placed correctly make sure to inspect all dash areas for adhesion and press down firmly where required. For avoiding center buckling while installation of larger dash kit pieces apply pressure from left to right. Never force any piece that is not wanting to apply properly. When the piece resists bending, use a heat source like a hair dryer to soften the piece and make the installation easier. Once you place all the dash kit pieces correctly give each one a final firm press down with the fingers.

Step #4: Give Finishing Touch

Your new dash kit can be cleaned by using soapy water or if there is some adhesive on the surface, you can use some WD40 on a rag to clean off the residue. This will not hurt the finish.

Conclusion:

Being sure to install your new dash kit following the instructions supplied with the kit, assures a successful and pleasing installation. Dash Kit Specialties offers the best quality dash kits along with proper and thorough instructions. For more information visit https://www.dashkitspecialties.com/

Wood Car Interior and Carbon Fiber Interior - A Few Aspects to Understand

The automobile manufacturing industry has seen a lot of changes in the past few years and all the credit goes to advanced technological innovations. And one of the trends in this industry is the use of lightweight and good-looking materials like carbon fiber for designing the interior of the vehicles. Although the classic wood car interior is still in trend.

Let us take a look at the different aspects of wood car interior and carbon fiber interior for designing and dressing up the interior of a car, truck or suv.

Wood Car Interior

During the early automobile industry days, plastics were hard to form and quite expensive. So for getting smooth and beautiful finishes for the interior of the car, the manufacturers used refined wood grain. However, carving, shaping and polishing wood needs intensive labor which makes it an expensive affair and were mainly used in expensive, high-end cars. Hence, wood car interiors became a symbol of luxury in the automobile industry. Wood car interior adds class and luxury to the cars. However, manufacturers such as Rolls Royce knows exactly how to use wood in the best way possible. And because of that, many car companies are using plastic materials that resemble wood - faux wood, which is a great alternative to real wood. A wood car interior is timeless in its warmth and elegance and will brighten up and warm up any interior of any car.

Carbon Fiber Interior

The carbon fiber reinforced polymer, commonly known as carbon fiber laminate, is a material that makes vehicles attractive and more efficient in terms of fuel and safer at the same time. Carbon fiber interior is sturdy as pure carbon fiber threads are woven into them and the polymer is reinforced by epoxy resin. The density of carbon fiber is about 1.3 to 1.5 g/cc, which makes it even lighter than magnesium, which was considered to be the lightest material used for manufacturing. Carbon fibers are still expensive due to their process of production which is either carried out manually or by automated machines. Carbon fiber comes in different colors and not only the common grey color they are known for.

The Purpose of Using Carbon Fiber Interior in a Vehicle

Today, high-performance cars are constructed using carbon fiber materials as these vehicles require a good power to weight ratio. Many of the vehicles have their whole bodies designed using carbon fiber reinforced polymer such as Porsche 918, Ford GT, and Alfa Romeo 4C. But production of such vehicles needs a lot of time and effort, which makes it highly expensive. Also, cars made using carbon fiber materials increase the battery life tremendously hence are used in electric cars.

People are getting more and more impressed by the appearance of carbon fiber interior which leads to high usage of these materials for cosmetic applications. In the past, to get rid of unwanted weight the car manufacturers of high-performance vehicles removed several parts from the interior of the car such as the rear seats or radios ect. Nowadays the use of carbon fiber interior for cars results in additional saving of weight. Besides that, the carbon fiber interior also makes it look good, elegant and stylish.

These are a few aspects of wood car interior and carbon fiber interior that you need to know before getting a new dash kit installed in your vehicles.

Conclusion:

To learn more about wood car interior and carbon fiber interior contact Dash Kit specialties. Visit us at  https://www.dashkitspecialties.com/interior-dash-kits.html